NeilMed NasaFlo Neti Pot with 60 Packets
NasaFlo Neti Pot is a natural soothing saline nasal wash. Neti pots have been around for thousands of years, mainly used by yoga enthusiasts.
$18.69 AUD
or 4 interest-free installments of
$4.67 AUD
by
General Information
Ingredients
Warnings
Directions
Shipping Information
Use For::
Nasal Allergies, Dryness & Hay Fever Sinus Pressure & Nasal Stuffiness Nasal Symptoms from Flu & Cold Nasal Irritation from Occupational & House Dust, Fumes, Animal Dander, Grass, Pollen, Smoke, etc. Post Nasal Drip & Nasal Congestion
Advantages::
Easy Flow, No Spill, No Mess Pot Design
Premixed Packets of all natural, USP Grade (Purity level 99% or higher) Sodium Chloride & Sodium Bicarbonate
Preservative, Drug, Iodine, BPA, Gluten and Latex Free
Suitable for use after sinus surgery and during pregnancy.
Convenient for travel
USP grade Sodium Chloride & Sodium Bicarbonate Mixture (pH Balanced, Isotonic & Preservative & Iodine Free)
Please read Warnings before using. Our recommendation is to replace the Neti Pot every three months.
Always rinse your nasal passages with NeilMed® SINUS RINSE™ packets only. Our packets contain a mixture of USP grade sodium chloride and sodium bicarbonate. These ingredients are of the purest quality available to make the dry powder mixture. Rinsing your nasal passages with only plain water without our mixture will result in a severe burning sensation as the plain water is not physiologic for your nasal lining, even if it is appropriate for drinking. Additionally, for your safety, do not use tap or faucet water for dissolving the mixture unless it has been previously boiled for five minutes or more as boiling sterilizes the water. Other choices are distilled, micro-filtered (through 0.2 micron), commercially bottled or, as mentioned earlier, previously boiled water at lukewarm or body temperature. You can store boiled water in a clean container for seven days or more if refrigerated. Do not use non-chlorinated or non-ultra (0.2 micron) filtered well water unless it is boiled and then cooled to lukewarm or body temperature. Do not rinse if your nasal passages are completely blocked or if you have an ear infection or blocked ears. If you have had recent ear or sinus surgery, contact your physician prior to irrigation. If you experience any pressure in the ears or burning in the nasal passages, stop irrigation and get further directions from your physician. Keep out of reach of children. Read and retain this enclosed brochure for instructions and other important information.
Always Use Distilled or Micro-Filtered (through 0.2 micron) or Commercially Bottled or Previously Boiled & Cooled Down Water at Lukewarm or Body Temperature. Please do not use tap or faucet water when using NeilMed's nasal wash devices unless it has been previously boiled and cooled down.
Rinse your nasal passages only with NeilMed® SINUS RINSE™ packets. Our packets contain a mixture of USP grade sodium chloride and sodium bicarbonate. These ingredients are the purest quality available to make the dry powder mixture. Rinsing your nasal passages with only plain water will result in a severe burning sensation. Use distilled, micro-filtered (through 0.2 micron), commercially bottled or previously boiled & cooled down water at lukewarm or body temperature, properly mixed with NeilMed® SINUS RINSE™ packets. Do not use tap or faucet water for dissolving the mixture unless it has been previously boiled and cooled down. Do not rinse if nasal passages are completely blocked or if you have an ear infection or blocked ears.
If you have had recent ear or sinus surgery, contact your physician prior to irrigation. If you experience any pressure in the ears or burning in the nasal passages, stop irrigation and get further directions from your physician. Keep out of reach of children. Read and retain this enclosed brochure, if provided, for instructions and other important information.
We recommend that you use the rinse ONE HOUR PRIOR to bedtime in order to avoid any residual solution dripping down the throat.
We strongly advise against the use of our kit on children or adults who have physical limitations or mental disabilities due to developmental or acquired disorders. Adults should read the directions first before using it on their children. Keep out of reach of children. Do not swallow the solution; however, if you do so accidentally, there is no harm as the amount of sodium ingested in one swallow is insignificant.
Patients who are unable to stand up or bend near the sink SHOULD NOT use this product. We advise you NOT to use this kit on patients who are bed bound or severely debilitated.
Step 1 Please wash your hands and rinse the device. Fill the NASAFLO® with 240 mL (8 fl oz) of lukewarm distilled, filtered or previously boiled water. Please do not use tap or faucet water to dissolve the mixture unless it has been previously boiled and cooled down. You may warm the water in a microwave, but we recommend that you warm it in increments of 5 to 10 seconds to avoid overheating, damaging the device or scalding your nasal passage.
Step 2 Cut the SINUS RINSE™ mixture packet at the corner and pour contents into the pot. Tighten the lid on the device securely. Place one finger over the hole of the cap and shake the device gently to dissolve the mixture.
Step 3 Standing in front of a sink, bend forward to your comfort level and tilt your head to one side. Keeping your mouth open, and without holding your breath, apply the tip of the device snugly against your nasal passage and ALLOW THE SOLUTION TO GENTLY FLOW until the solution starts draining from the opposite nasal passage. Use roughly half the solution in the NASAFLO® (120 mL / 4 fl oz). It should not enter your mouth unless you are tilting your head backwards. To adjust or stop the flow, you may place your finger over the hole of the cap, and depending on the seal, you may be able to control the flow.
Step 4 Blow your nose very gently, without pinching nose completely to avoid pressure on eardrums. If tolerable, sniff in gently any residual solution remaining in the nasal passage once or twice, because this may clean out the posterior nasopharyngeal area, which is the area at the back of your nasal passage. At times, some solution will reach the back of your throat, so please spit it out. For NASAFLO® users, to help drain any residual solution, blow your nose gently while tilting your head forward and to the same side of the nasal passage you just rinsed.
Step 5 Now repeat steps 3 & 4 on your other nasal passage. If there is any solution left over, please discard it. We recommend you make a fresh solution each time you rinse. Rinse once or twice daily OR as directed by your physician.
Australia:
Flat Rate: $11.95 for all orders Australia-wide.
Free Shipping on all orders over $99 and under 3kg in weight
Click & Collect (WA): Shop online and collect your order from our pharmacies in North Perth, Claremont & Wembley
All other orders proceed through the checkout for a shipping quote.
Transit Time: All orders are shipped via Australia Post’s Parcel Post service. Delivery typically takes up 5-7 days from lodgement with Australia Post.
International:
All international orders are shipped via Australia Post International Standard
Proceed through the checkout for a shipping quote.
Michael’s Chemist is not liable for any costs incurred due to customs or delivery taxes
Transit Time: 3-10 working days, excluding customs.
General Information
Use For::
Nasal Allergies, Dryness & Hay Fever Sinus Pressure & Nasal Stuffiness Nasal Symptoms from Flu & Cold Nasal Irritation from Occupational & House Dust, Fumes, Animal Dander, Grass, Pollen, Smoke, etc. Post Nasal Drip & Nasal Congestion
Advantages::
Easy Flow, No Spill, No Mess Pot Design
Premixed Packets of all natural, USP Grade (Purity level 99% or higher) Sodium Chloride & Sodium Bicarbonate
Preservative, Drug, Iodine, BPA, Gluten and Latex Free
Suitable for use after sinus surgery and during pregnancy.
Convenient for travel
Ingredients
USP grade Sodium Chloride & Sodium Bicarbonate Mixture (pH Balanced, Isotonic & Preservative & Iodine Free)
Warnings
Please read Warnings before using. Our recommendation is to replace the Neti Pot every three months.
Always rinse your nasal passages with NeilMed® SINUS RINSE™ packets only. Our packets contain a mixture of USP grade sodium chloride and sodium bicarbonate. These ingredients are of the purest quality available to make the dry powder mixture. Rinsing your nasal passages with only plain water without our mixture will result in a severe burning sensation as the plain water is not physiologic for your nasal lining, even if it is appropriate for drinking. Additionally, for your safety, do not use tap or faucet water for dissolving the mixture unless it has been previously boiled for five minutes or more as boiling sterilizes the water. Other choices are distilled, micro-filtered (through 0.2 micron), commercially bottled or, as mentioned earlier, previously boiled water at lukewarm or body temperature. You can store boiled water in a clean container for seven days or more if refrigerated. Do not use non-chlorinated or non-ultra (0.2 micron) filtered well water unless it is boiled and then cooled to lukewarm or body temperature. Do not rinse if your nasal passages are completely blocked or if you have an ear infection or blocked ears. If you have had recent ear or sinus surgery, contact your physician prior to irrigation. If you experience any pressure in the ears or burning in the nasal passages, stop irrigation and get further directions from your physician. Keep out of reach of children. Read and retain this enclosed brochure for instructions and other important information.
Always Use Distilled or Micro-Filtered (through 0.2 micron) or Commercially Bottled or Previously Boiled & Cooled Down Water at Lukewarm or Body Temperature. Please do not use tap or faucet water when using NeilMed's nasal wash devices unless it has been previously boiled and cooled down.
Rinse your nasal passages only with NeilMed® SINUS RINSE™ packets. Our packets contain a mixture of USP grade sodium chloride and sodium bicarbonate. These ingredients are the purest quality available to make the dry powder mixture. Rinsing your nasal passages with only plain water will result in a severe burning sensation. Use distilled, micro-filtered (through 0.2 micron), commercially bottled or previously boiled & cooled down water at lukewarm or body temperature, properly mixed with NeilMed® SINUS RINSE™ packets. Do not use tap or faucet water for dissolving the mixture unless it has been previously boiled and cooled down. Do not rinse if nasal passages are completely blocked or if you have an ear infection or blocked ears.
If you have had recent ear or sinus surgery, contact your physician prior to irrigation. If you experience any pressure in the ears or burning in the nasal passages, stop irrigation and get further directions from your physician. Keep out of reach of children. Read and retain this enclosed brochure, if provided, for instructions and other important information.
We recommend that you use the rinse ONE HOUR PRIOR to bedtime in order to avoid any residual solution dripping down the throat.
We strongly advise against the use of our kit on children or adults who have physical limitations or mental disabilities due to developmental or acquired disorders. Adults should read the directions first before using it on their children. Keep out of reach of children. Do not swallow the solution; however, if you do so accidentally, there is no harm as the amount of sodium ingested in one swallow is insignificant.
Patients who are unable to stand up or bend near the sink SHOULD NOT use this product. We advise you NOT to use this kit on patients who are bed bound or severely debilitated.
Directions
Step 1 Please wash your hands and rinse the device. Fill the NASAFLO® with 240 mL (8 fl oz) of lukewarm distilled, filtered or previously boiled water. Please do not use tap or faucet water to dissolve the mixture unless it has been previously boiled and cooled down. You may warm the water in a microwave, but we recommend that you warm it in increments of 5 to 10 seconds to avoid overheating, damaging the device or scalding your nasal passage.
Step 2 Cut the SINUS RINSE™ mixture packet at the corner and pour contents into the pot. Tighten the lid on the device securely. Place one finger over the hole of the cap and shake the device gently to dissolve the mixture.
Step 3 Standing in front of a sink, bend forward to your comfort level and tilt your head to one side. Keeping your mouth open, and without holding your breath, apply the tip of the device snugly against your nasal passage and ALLOW THE SOLUTION TO GENTLY FLOW until the solution starts draining from the opposite nasal passage. Use roughly half the solution in the NASAFLO® (120 mL / 4 fl oz). It should not enter your mouth unless you are tilting your head backwards. To adjust or stop the flow, you may place your finger over the hole of the cap, and depending on the seal, you may be able to control the flow.
Step 4 Blow your nose very gently, without pinching nose completely to avoid pressure on eardrums. If tolerable, sniff in gently any residual solution remaining in the nasal passage once or twice, because this may clean out the posterior nasopharyngeal area, which is the area at the back of your nasal passage. At times, some solution will reach the back of your throat, so please spit it out. For NASAFLO® users, to help drain any residual solution, blow your nose gently while tilting your head forward and to the same side of the nasal passage you just rinsed.
Step 5 Now repeat steps 3 & 4 on your other nasal passage. If there is any solution left over, please discard it. We recommend you make a fresh solution each time you rinse. Rinse once or twice daily OR as directed by your physician.
Shipping Information
Australia:
Flat Rate: $11.95 for all orders Australia-wide.
Free Shipping on all orders over $99 and under 3kg in weight
Click & Collect (WA): Shop online and collect your order from our pharmacies in North Perth, Claremont & Wembley
All other orders proceed through the checkout for a shipping quote.
Transit Time: All orders are shipped via Australia Post’s Parcel Post service. Delivery typically takes up 5-7 days from lodgement with Australia Post.
International:
All international orders are shipped via Australia Post International Standard
Proceed through the checkout for a shipping quote.
Michael’s Chemist is not liable for any costs incurred due to customs or delivery taxes
Transit Time: 3-10 working days, excluding customs.